Please send Email to us. Your inquiries will be replied in time, high attention and excellent service also could be provided.

We are very confident in our products and we pack them very well, so usually you will receive your order in good condition, any quality question, we will deal with it immediately.

Yes, we would privide free samples if you could pay for the freight. Once the order is placed,the money can be deducted from it.

Normally it's 20~30 days for a 20'container after the deposit is received.The exact time depends on the orders we have.

It is safe to use ice removal products such as sodium chloride and calcium chloride on WPC Decking products. When the ice melts after using salt, there may be a white residue that remains on the deck. This residue can be removed with a light cleaning or naturally with a rain shower.Do not use a metal shovel on WPC Decking products. Instead, use...

#7, #8 or #9 stainless steel or coated, non-composite trim-head screw should be used.All deck boards require a 2 1/4″ or longer screws.Commercial board, perimeter strip, and feature strip require 3″ or longer screws.All fasteners must be located a minimum of 3/4″ from the ends and edges of the deck boards to avoid damage. ...

Any mild household cleaner can be used to remove stains.Using a power washer yearly will help remove any surface stains that may accumulate over time from regular deck usage.A wire brush may be used to remove scratches and tough stains. Using a wire brush may change the appearance of the deck product where the wire brush was used. ...

Using the clip system the space is automatically set at 6mm.

450mm for residential use and 400mm for commercial purposes.

WPC is “non-combustible” but as with all materials, it is damaged by fire.

Yes! It has a textured surface and is very good for use around wet areas such as spas, pools, marinas etc.

wpc is ideal in a marine environment, being unaffected by salt air.

Yes definitely, however we do we recommend any area that gets wet be well ventilated.

With wpc you can use standard power saws and drills. As with using any power tools, safety glasses and face masks should be used when cutting or drilling wpc. The wpc “sawdust” is a coarse, heavy sawdust that doesn’t tend to “float” in the air. This makes it very safe for handling.

With wpc products that have hollow sections, it is common to cover exposed ends with “end-caps” (available in all colours). This will avoid potential water /moisture penetration as well as spiders and cockroaches. To give the best effect, it is suggested that either end-caps or fascia board is used.

Whether at the timber merchant premises or at your own house awaiting installation,wpc should be stored in a dry, flat area under roof. Failure to keep packs dry in storage can lead to the growth of mold spores on boards. When moving product around, wpc should be carried on its edge.

ULTRA-VIOLET inhibitors have been added to our decking to reduce color fading due to extensive sun exposure. A slight change in color will occur but will retain this lighter shade through out the life of the product.

The density of our wpc decking is 1.3%-1.4%(1300-1400kgs/cbm). The strength of the hollow one is about 320kgs (That's to say, based on the space between the keels of 35cm, the decking surface can bear the weight of 320kgs.) and the strength of the solid one is 400kgs-500kgs.(That's to say, based on the space between the keels of 35cm, the decki...

No. If replce the broken decking, you need to break the clips of both sides of the broken decking and then take the broken decking out, it's easy.

When we install the decking, firstly the keels are fixed in the ground surface with the T-clip and then we put the solid decking board on the keels. You know the wpc decking board can't be put on the ground surface directly. For one thing, it can affect of the planeness of the decking surface after installation. For the other thing, it is not g...

First of all, the wood plastic materials are 100% recyclable; it is long-lasting, stable for the outdoor conditions, like sun exposure, rain, temperature ariations etc; it requires low maintenance.

WPC products offer superior durability and performance that you can’t get from wood. WPC won’t rot, warp, or splinter; and they never require staining or painting to maintain great looks.

WPC Decking has a higher density than wood; however, certain profiles are engineered to be lighter in bulk weight than actual lumber. WPC is resistant to termite and rot, and has low moisture absorption. Thus, WPC has a much longer life span than regular lumber.

There are no toxic chemicals or preservatives involved in the manufacturing of WPC Decking.

WPC Decking should be stored on wood supports placed approximately every three feet and under a dry lumber cover or tarp.Rainwater that would not stain a deck will stain stacked lumber, so remember to keep it dry.

Polyethylene is non-toxic and is used for applications such as milk jugs, water jugs and grocery sacks. When burned completely, itwill convert to carbon dioxide and water vapor.

WPC Decking can be easily installed with standard woodworking tools, including hammer, skill saw, rasp, level, and square.Standard carbide saw blades with less than 20 teeth are recommended.

WPC has been extensively tested under hostile accelerated aging conditions by outside laboratories. It is warranted to resist rot and fungal decay when properly installed and maintained.

WPC Decking has strong ability to adapt and can resist the temperature 60 degree to -30degree.

If so, what types of products should be used? Painting and staining is not recommended for WPC; however, if required, use a proper high quality primer and paint only on the brushed surface. Do not use paint or stain on surfaces of high traffic areas.

Generally, 1-2 weeks after confirmation of your deposit payment. Specific time depends on order items and order quantity.

Our common length is 1.8m, 2.6m, 2.9m, 3m, 4m and 5.8m. We also provide customized length.

By T/T payment, 30% in advance and 70% before shipping.

Shortly speaking, WPC not only has material properties, weather-resistant, color fastening, chemical stability, but also extremely low maintenance.

Wood Plastic Composites (WPCs) are produced by thoroughly mixing ground wood particles and heated thermoplastic resin. The most common method of production is to extrude the material into the desired shape, though injection molding is also used. WPCs may be produced from either virgin or recycled thermoplastics including HDPE, LDPE, PVC, PP, ABS, PS, and PLA. Polyethylene based WPCs are by far the...

Normal Standard of QTY of Decking for 20ft Containter for 20ft container, the G.W is below 22tons.hollow #decking with joist:2.2m/pc, 800~1000sqm2.9m/pc, 500~700sqmsolid decking with #joist:2.2m/pc, 500~700sqm2.9m/pc, 500~700sqm

Our #HOHEcotech #decking comes in 8 colors:cedar,copper brown,wood,sandal wood,coffee,grey,dark grey,mocha. The style is a simulated wood-grain and has a textured surface reducing the slippery effect.

Polyethylene is non-toxic and is used for applications such as milk jugs, water jugs and grocery sacks. When burned completely, it will convert to carbon dioxide and water vapor.

#WPC #Decking should be stored on wood supports placed approximately every three feet and under a dry lumber cover or tarp. Rainwater that would not stain a deck will stain stacked lumber, so remember to keep it dry.

There is no need for special tools. Regular woodworking tools are all you need for cutting and building a #deck. Our installation instructions have a short list of simple tools that will help.